
MAUS Stixx PRO
Electric enclosures are the most common cause of fires in electrical installations. The MAUS Stixx PRO series is a revolution in fire suppression and consists of award-winning small units that are easily placed in electric enclosures to prevent the fire from spreading.
Reasons for fires in electrical enclosures

Badly routed or old cables
Even electricity has a best-before date, and when this is passed, the electricity system poses a risk. It is age that causes old materials to weather and also the influence of the surrounding materials

Lightning strikes
A lightning strike may lead to fire in the electrical system as the lightning seeks to ground itself through the conductive wiring.

Bad & Loose components
If the electronics are cheap or not tight, it is probably the case that inferior components and materials were used. It will easily become hot inside the electrical center and if it is not detected in time, it can after a while result in a fire

An innovative solution
MAUS Stixx PRO is an automatic fire protection device that extinguishes the fire before it even starts. This award-winning innovation is installed in any small space where a fire may occur. It triggers automatically at 170°C and fills the space with a potassium-based smoke that absorbs the heat of the fire and breaks into the chemical composition of the fire, extinguishing it. Smaller than a normal marker, it fits everywhere and acts as a preventive fire protection.
A MAUS Stixx for every size

MAUS Stixx Pro (0,1m³)
-
Art no : 1350-1
-
Protected Space : 0,1 m³
-
Dimensions : 9.8 × 1.8 × 1cm
-
Weight : 26 g
-
Warranty : 5 years (6 year lifespan)
-
Operational Temperature : -30°C to 70°C
-
Discharge Time : 7s
-
Activation Temperature : 170°C+10°C
-
Certificate : CE 2829

MAUS Stixx Pro 5 (0,5m³)
-
Art no : 1360-1
-
Protected Space : 0,5 m³
-
Dimensions : 7.6 × 7.6 × 2.2cm
-
Weight : 130 g
-
Warranty : 5 years (6 year lifespan)
-
Operational Temperature : -30°C to 70°C
-
Discharge Time : 7s
-
Activation Temperature : 170°C+10°C
-
Certificate : CE 2829

MAUS Stixx Pro 10 (1m³)
-
Art no : 1370-1
-
Protected Space : 1 m³
-
Dimensions : 7.6 × 7.6 × 2.2cm
-
Weight : 200 g
-
Warranty : 5 years (6 year lifespan)
-
Operational Temperature : -30°C to 70°C
-
Discharge Time : 7s
-
Activation Temperature : 170°C+10°C
-
Certificate : CE 2829
Areas of application
Outboards (under the hood), in the electrical and battery compartments of motorhomes/caravans, in the electrical panel of an apartment/house, EV charge stations, and all other small areas where a fire can occur.These are all important areas to protect against fire.
MAUS Stixx V1 (0,2m³)
The new MAUS Stixx PRO V1 is built on the same technology as the previous model (MAUS Stixx PRO), but with some additions to increase the fire safety even more with faster reaction time and anenhanced formula that is more powerful.


-
Article number: 135X-1
-
EAN: 7350015530331
-
Dimensions: 10 x 2,0 x 1,3 cm (hdc cable 3 cm)
-
Weight: 24 g
-
Product life: 5 years (6 years shelf life)
-
Discharge time: ≤3s
-
Protected area: 0,1 m3 - 0,2 m3
-
Activation Temperature: 170°C±10°C
-
Certifications: CE 2829
-
Operational Temperature: -30°C - 70°C
-
Units per box: 10


Faster Activation
The added heat detection cables (hdc) on the sides of the unit will detect and activate the unit faster.
Enhanced Formula
The enhanced formula creates a safer product as it will fill the space more efficiently.

Advantages of the MAUS Stixx Pro Series

Does not harm electric components.

100% non-toxic and environmentally friendly potassium mix.

No electricity, no pressure and no battery needed.

Small and portable size.

Protects from 0,1 m³ to 5 m³(chain connection).

Activation at a very low temperature 170°C.

MAUS Stixx Pro - Automatic Fire Supression Demo in Electric Cabinet (Ireland)


MAUS Stixx Pro - Automatic Fire Supression Demo in Electric Cabinet (Ireland)

MAUS STIXX PRO fireprotection for cars

Saving a boat engine from fire. MAUS Stixx Pro(Automatic fire suppressor)

Fire-safe cabinet for charging lithium batteries.

Stixx Pro V1 HDC extention
Technology



Inside the MAUS products there is a solid substance of a potassium compound. Potassium radicals are very active and they interrupt the chemical combustion of very small particles of gas, the result is a more effective extinguishing agent than conventional powder. Another important feature of aerosols is that the dropping of velocity of the particles decreases as the surface becomes larger in relation to the mass, which makes the air resistance relatively large in relation to the gravitational force. This results in particles staying suspended for a longer period of time, contributing to a longer inerting period creating a re-ignition protection. Together, these factors make PGA (pyrotechnical generated aerosols) a very effective extinguishing agent. The extinguishing effect per unit of weight is in the range of 3-10 times.
Certifications

Since MAUS works with a technology that is new and not conventional, they have had to be creative to find solutions to certify the technology to make sure that they can prove that it does what they say it does and that it’s a safe product to market. To prove this MAUS does Module B tests in Germany together with BAM (bam.de) and Module E tests with Fiditas (fiditas.com). These tests and the yearly audits Fiditas performs at MAUS’ headquarters is the foundation of the more advanced Swedish CE Mark 2829 that has been received. Having no standard for approval is a lot different to not meeting the standard of approval and therefor we push the development forward to create new standards for other larger certification agencies so we can achieve more certifications. We also report and follow the regulations regarding chemicals through ECHA, Kemikalieinspektionen and REACH.