MAUS STIXX PRO
Electrical panels are the most common cause of fires in electrical installations.
The series MAUS Stixx PRO is a revolution in the fight against fires and consists of small award-winning units that can be easily placed in electrical cabinets to prevent fire from spreading from the electrical enclosure to the building.
Causes of fires in electrical panels
Old or poorly routed cables
The electrical installation also has a shelf life, and when this is exceeded, the electrical system poses a risk. It is age that causes old materials to deteriorate, as well as the influence of surrounding materials.
Lightning strikes
A lightning strike can cause a fire in the electrical system as lightning seeks to ground itself through the conductive wiring.
Faulty and defective components
If the electronics are cheap or poorly sealed, it is likely that inferior components and materials have been used.
The inside of the electrical centre can easily heat up and, if not detected in time, this can cause a fire.
MAUS STIXX PRO
An innovative solution
MAUS Stixx PRO is an automatic fire protection device that extinguishes the fire before it even starts.
This award-winning innovation fits into every small space where a fire may occur. It automatically activates at 170°C and fills the space with a potassium-based smoke that absorbs the heat of the fire and breaks down the chemical composition of the fire, thus extinguishing it.
Smaller than a normal marker, it fits anywhere and acts as a preventive fire protection.
Advantages of the MAUS Stixx Pro series
Does not damage electrical components.
No electricity, no pressure, and no battery required.
Protects from 0.1 m³ to 5 m³ (chain connection).
100% non-toxic and environmentally friendly potassium mixture.
Small size and portable.
Activation at very low temperature 170°C.
One MAUS Stixx for every volume
Protected volume 0.1 m³
Item number: 1350-1
Protected space: 0.1 m³
Dimensions: 9.8 × 1.8 × 1cm
Weight: 26 g
Warranty: 5 years (lifespan of 6 years)
Operating temperature: -30°C to 70°C
Discharge time: 7s
Activation temperature: 170°C+10°C
Certificate: CE 2829
Protected volume 0.2 m³
Item number: 135X-1
Protected space: 0.2 m³
Dimensions: 10 x 2.0 x 1.3 cm (hdc cable 3 cm)
Weight: 24 g
Warranty: 5 years (shelf life: 6 years)
Operating temperature: -30°C - 70°C
Discharge time: ≤ 3 s
Activation temperature: 170°C+10°C
Possibility to connect in series and increase the protected volume
Certifications: CE 2829
Protected volume 0.5 m³
Item number: 1360-1
Protected space: 0.5 m³
Dimensions: 7.6 × 7.6 × 2.2 cm
Weight: 130 g
Warranty: 5 years (lifespan 6 years)
Operating temperature: -30°C to 70°C
Discharge time: 7s
Activation temperature: 170°C+10°C
Possibility to connect in series and increase the protected volume
Certificate: CE 2829
Protected volume
1 m³
Item number: 1370-1
Protected space: 1 m³
Dimensions: 7.6 × 7.6 × 2.2 cm
Weight: 200 g
Warranty: 5 years (lifespan 6 years)
Operating temperature: -30°C to 70°C
Discharge time: 7s
Activation temperature: 170°C+10°C
Possibility to connect in series and increase the protected volume
Certificate: CE 2829